Canon MF8580Cdw Service Manual page 142

4
Disassembly/Assembly > Controller System > Removing the Control Panel Unit > Procedure
CAUTION:
Do not touch the IC part [A] of the LCD Flat Cable [1].
[1]
8) Turn the Control Panel Unit [1] over, and disconnect the Flat Cable [2].
CAUTION:
Do not damage and cut the Flat Cable [2].
[3]
[2]
4 Disassembly/Assembly > Controller System > Removing the Control Panel Unit > Procedure
F-4-145
[1]
F-4-146
CAUTION:
Be sure to perform the following when connecting the Flat Cable [1] to the connector
with a lock [2].
Be sure to insert the Flat Cable [1] into the connector with a lock [2], and after checking
that both sides (edges) [A] of the Flat Cable [1] are fitted in the 2 grooves [B] of the
connector with a lock [2], lock the Flat Cable Connector Lock [3].
[3]
[2]
[B]
[A]
[1]
[3]
[2]
[B]
[A]
[1]
4-72
[2]
[B]
[A]
[1]
[2]
[B]
[A]
[1]
F-4-147
4-72