Canon MF8580Cdw Service Manual page 229

4
Disassembly/Assembly > Document exposure/feeder system > Removing the ADF Unit/Copyboard + Reader Unit > Procedure
6) Disconnect the connector [1], connector (only for models with ADF) [2], and 2 Flat Cables [3].
• 1 Flat Cable Connector Lock [4]
• 1 Ferrite Core [5]
• 2 Harness Guides [6]
[6]
x4
x3
[2]
[1]
4 Disassembly/Assembly > Document exposure/feeder system > Removing the ADF Unit/Copyboard + Reader Unit > Procedure
[5]
[3]
[4]
F-4-349
CAUTION:
Be sure to perform the following when connecting the Flat Cable [1] to the connector
with a lock [2].
Be sure to insert the Flat Cable [1] into the connector with a lock [2], and after checking
that both sides (edges) [A] of the Flat Cable [1] are fitted in the 2 grooves [B] of the
connector with a lock [2], lock the Flat Cable Connector Lock [3].
[1]
[A]
[B]
[2] [3]
[1]
[A]
[B]
[2] [3]
4-159
[1]
[A]
[B]
[2]
[1]
[A]
[B]
[2]
F-4-350
4-159