Canon MF8580Cdw Service Manual page 148

4
Disassembly/Assembly > Controller System > Removing the Main Drive Unit > Procedure
6) Remove the Harness Guide and Power Auxiliary Plate [1].
• 2 Screws [2]
[1]
[1]
x2
4 Disassembly/Assembly > Controller System > Removing the Main Drive Unit > Procedure
7) Remove the DC Controller Support Plate [1].
• 1 Special Flat-head Screw [2]
• 2 Black Screws [3]
• 3 Screws [4]
• 2 Bosses [5]
• 1 Protrusion [6]
CAUTION:
[1]
Since the Special Flat-head Screw [2] adjusts the interval between the plate [1] and
parts in the vicinity, be sure to install the Special Flat-head Screw [2] in the location it
was in before removal.
F-4-160
[2] [3]
[1] [6]
x6
[3]
[5]
[4]
4-78
[4]
[5]
F-4-161
4-78