Setting Of Ncu Parameters - Canon MF720 Series Service Manual

No.
07 Spare
08 STORED_DIAL_MODE wait timer
09 Not in use
10 T.30 T0 timer
11 T.30 T1 timer (for incoming transmission)
12 Maximum incoming lines
13 T.30 EOL timer
14 Not in use
15 Threshold between hokking nad on-hook
16 Lead time to the first response when switching between FAX and TEL
17 Duration to activate pseudo-RBT cadence
18 Duration to deactivate pseudo-RBT cadence (short)
19 Duration to deactivate pseudo-RBT cadence (long)
20 Duration to activate pseudo-ring cadence
21 Duration to deactivate OFF Hook cadence (short)
22 Duration to deactivate OFF Hook cadence (long)
23 to 24 Not in use
25 CNG monitor duration while the answering device is activated
26 to 28 Not in use
29 Off-hook PCB duty settings(For NAC, setting can be made with SPL71100
in special management mode.)
30 to 48 Not in use
49 NSX MODEL ID
50 Not in use
51 Threshold to detect hook
52 Not in use
53 Set DTMF calling counts when receiving FAX remotely
54 Set Busy Tone outgoing duration when using handset
55 to 80 Not in use

Setting of NCU Parameters

■ TONE/PULSE
Operation Method
1. Setting of Tone Parameters
Operate as follows, and change to the parameter setting mode.
1. While "#NCU" is displayed, press "OK" key
2. Press "#TONE" key
3. Press "OK" key
2. Setting of Pulse Parameters
Operate as follows, and change to the pulse setting mode.
1. While "#NCU" is displayed, press "OK" key
2. Press "#PULSE" key
3. press "OK" key
Item
TONE
PULSE PULSE FORM
PULSE NUM
Numeric parameter setting mode
Parameter
Function
01; Tone signal sending time (PSTN)
02; Minimum pause time (PSTN)
Pulse digit format
01; Not in use
02; Not in use
03; Pulse dial make ratio
304
8. Service Mode
Allowable setting range
0 to 65 sec
55 sec principally
0 to 9999 (France: 3500, Others: 3000)
0 to 65535 (line)0: without limitation
500 to 3000 (set to 55 sec by default)
0 to 999
0 to 9
0 to 999
0 to 999
0 to 999
0 to 999
0 to 999
0 to 7
0 to 999
20 (*10ms)
0 to 4095
10 to 9999
10 to 9999 (default 25)
Setting range
10 to 9999 (msec)
10 to 9999 (msec)
0 to DP ( N )
1 to DP ( N+1 )
2 to DP ( 10-N )
10 to 90 (%)