Removing The Adf Pickup Roller (Mf8280Cw/8250Cn/8240Cw/8230Cn); Removing The Adf Separation Roller (Mf8280Cw/8250Cn/8240Cw/8230Cn) - Canon MF8580Cdw Service Manual

4
Disassembly/Assembly > Document exposure/feeder system > Removing the ADF separation roller (MF8280Cw/8250Cn/8240Cw/8230Cn) > Procedure
Removing the ADF Pickup Roller
(MF8280Cw/8250Cn/8240Cw/8230Cn)
■ Preparation
1) Remove the ADF roller unit. Refer to page 4-164.
■ Procedure
CAUTION:
Do not touch the surface of the roller.
1) Insert the end of the flat-blade screwdriver into the [A] part to remove the ADF Pickup
Roller Unit [1].
2) Remove the ADF Pickup Roller [1].
[1]
4 Disassembly/Assembly > Document exposure/feeder system > Removing the ADF separation roller (MF8280Cw/8250Cn/8240Cw/8230Cn) > Procedure
[1]
[A]
F-4-365
F-4-366
Removing the ADF separation roller
(MF8280Cw/8250Cn/8240Cw/8230Cn)
■ Preparation
1) Remove the ADF roller unit. Refer to page 4-164.
■ Procedure
CAUTION:
Do not touch the surface of the roller.
1) Remove the bushing [1] and 2 plastic e-rings [2].
[1]
2) Slide the Roller Shaft [1] to remove the parallel pin [2].
CAUTION:
Be careful not to lose the parallel pin [2] at assembly/disassembly.
[1]
[2]
F-4-367
[2]
F-4-368
4-166
4-166