Canon MF8580Cdw Service Manual page 344

E Detail Item
Code Code
E100 0003 Title Error in scanner motor/laser unit/BD
Description Failure in Black optical unit
Remedy 1.Check connectors of laser scanner unit and DC
controller PCB
2.Replace laser scanner units
3.Replace DC controller PCBs
E110 0000 Title Error in primary pseudo-BD correction
Description Scanner failed to be ready after starting up pseudo-BD
control
Remedy 1.Replace laser scanner units
2.Replace DC controller PCBs
E194 0000 Title Error in Patch Sensor
Description Patch Sensor does not function normally
Remedy 1.Check DC controller PCB connectors
2.Replace ITB units
3.Replace DC controller PCBs
4.Replace toner cartridges
E196 0000 Title Error in DCON ROM
Description Failed to update ROM of DC controller PCB
Remedy 1.Update the set of main controller firmware
2.Replace DC controller PCB
E196 1000 Title Error in DCON ROM
Description Error in writing in / reading from ROM (main)
Remedy 1.Update the set of main controller firmware
2.Replace DC controller PCBs
E196 2000 Title Error in DCON ROM
Description Error in writing in/reading from ROM (storing settings)
Remedy 1.Update the set of main controller firmware
2.Replace DC controller PCBs
E198 0000 Title Failure in DC controller memory
Description Failure in DC controller memory
Remedy Replace DC controller PCBs
E202 0001 Title Error in reader HP sensor
Description Error in reader HP outward
Failed to move to HP even when CIS unit moves
backward.
Remedy 1.Replace reader HP sensors
2.Replace reader motors
3.Replace reader units
E202 0002 Title Error in reader HP sensor
Description Error in reader HP homeward
Failed to move to HP even when CIS unit moves forward.
Remedy 1.Replace reader HP sensors
2.Replace reader motors
3.Replace reader units
7
Error codes > Error Codes
Description M82 M85
○ ○
○ ○
– ○
○ ○
○ ○
○ ○
○ ○
○ ○
○ ○
7 Error codes > Error Codes
E Detail Item
Code Code
E246 0000 Title System error
Description System error
Remedy Contact to the sales companies.
E247 0000 Title System error
Description System error
Remedy Contact to the sales companies.
E248 0001 Title Error in access to backup data for Reader (reading error
at power-on)
Description The Reader-related adjustment values could not be read.
Remedy 1. Clear the backup RAM of RCON.
Execute COPIER>FUNCTION>CLEAR>RCON.
2. Enter all the values written on the service label in
service mode again.
3. Turn OFF and then ON the main power.
E350 0000 Title System error
Description System error
Remedy Contact to the sales companies.
E351 0000 Title System error
Description System error
Remedy 1.Turn OFF and then ON the main power.
2.Replace main controller PCBs
E354 0000 Title System error
Description System error
Remedy Contact to the sales companies.
E355 0000 Title System error
Description System error
Remedy Contact to the sales companies.
E355 0004 Title System error
Description System error
Remedy Contact to the sales companies.
E355 0005 Title System error
Description System error
Remedy Contact to the sales companies.
E719 0000 Title Card Reader communication error (serial communication)
Description Communication with the Card Reader could not be started
at startup.
Remedy 1. Check the connection of the Card Reader-F1, and turn
OFF and then ON the main power switch.
2. Remove the Card Reader-F1.
NOTE: After performing the remedy work above, go
through the following to clear the error: COPIER>
FUNCTION> CLEAR> E719-CLR.
7-5
Description M82 M85
– –
– –
– –
– –
○ ○
– –
– –
– –
– –
– –
7-5