4
Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
Image Formation System
Location
[2]
No.
Parts Name
Main Unit
[1] ITB Unit
Product
Configuration
[2] Secondary Transfer Outer
Product
Roller
Configuration
4
Disassembly/Assembly > Image Formation System > Removing the ITB Unit > Procedure
[1]
F-4-496
Remarks
Reference
Adjustment
during parts
replacement
-
(Refer to page 4-218) -
-
(Refer to page 4-223) -
T-4-44
Removing the ITB Unit
■ Preparation
1) Remove the Right Cover. Refer to page 4-147.
2) Remove the Left Cover. Refer to page 4-144.
3) Remove the Rear Upper Cover. Refer to page 4-156.
■ Procedure
CAUTION:
Do not touch the ITB.
CAUTION:
While removing the cartridges, be sure not to scratch the drum surface. And cover the
drum surface.
1) Open the Front Cover [1].
2) Pull out the Cartridge Tray [1].
CAUTION:
Since the Cartridge Tray interferes with the stopper when removing the stopper, do not
pull out the Cartridge Tray until it hits the end.
[1]
4-218
[2]
F-4-497
4-218