4
Disassembly/Assembly > Pickup Feeder System > Removing the Delivery Unit > Procedure
Removing the Delivery Unit
■ Preparation
1) Removing the Right Cover. Refer to page 4-20.
2) Removing the Left Cover. Refer to page 4-17.
3) Removing the Rear Upper Cover. Refer to page 4-24.
4) Removing the Rear Cover. Refer to page 4-24.
5) Removing the Rear Lower Cover. Refer to page 4-25.
6) Removing the Rear Cover Rib Unit. .Refer to page 4-27
7) Removing the Duplex Printing Reverse Drive Unit. Refer to page 4-85.
8) Removing the Fixing Assembly. Refer to page 4-104.
9) Removing the ADF Unit + Reader Unit. Refer to page 4-32.
10) Removing the Upper Cover. Refer to page 4-28.
■ Procedure
1) Remove the frame [1].
• 6 screws [2]
[1]
x6
[2]
[2]
4
Disassembly/Assembly > Pickup Feeder System > Removing the Delivery Unit > Procedure
2) Release the 2 claws [1], and disconnect the connector [2].
3) Remove the wire harness [1] from the wire harness guide.
• 3 connectors [2]
• 6 fixing guides [3]
[2]
[2]
F-4-285
x3
x6
[3]
[2]
[3]
[2]
[1]
4-128
x2
[1]
[1]
[2]
F-4-286
F-4-287
4-128