General Instructions For Installation - Festo CPX-CM-HPP Description

2. Fitting and installation
2.1

General instructions for installation

Festo CPX-CM-HPP-EN 2017-06b English
Warning
Before carrying out installation and maintenance work,
switch off the following:
– if applicable, the compressed air supply
– operating voltage supply for the electronics/sensors
– load voltage supply for the outputs/valves
In this way, you can avoid:
– uncontrolled movements of loose tubing lines
– unintended movements of the connected actuators
– undefined switching statuses of the electronics
Warning
The CPX-CM-HPP contains electrostatically sensitive
devices.
Therefore, do not touch any components.
•
Observe the handling specifications for electrostatically
•
sensitive devices.
They will help you avoid damage to the electronics.
Information about mounting of the CPX terminal can be found
in the CPX system description (CPX-SYS-...).
Information on mounting the components of the positioning
system can be found in the related components
documentation.
2-3