Glossary - Festo CPX-CM-HPP Description

Contents and general instructions

Glossary

Term/abbreviation
Logic 0
Logic 1
0xA0
A0
h
A
AB
Axis
Axis connection
CPX-FEC
CPX-CEC-...
CPX module
CPX terminal
E
I/Os
FE
Bus node
FHPP
Handheld CPX-MMI
Parameters
Festo CPX-CM-HPP-EN 2017-06b English
The following product-specific terms and abbreviations are
used in this manual:
Significance
Input or output provides 0 V (also LOW, FALSE or 0-signal).
Input or output provides 24 V (also HIGH, TRUE or 1-signal).
Hexadecimal numbers are marked by a prefixed "0x" or by a lowered "h".
Example: 0xA0 = A0 = 160 decimal.
h
Digital output
Output byte
Motor controller, linear/rotative axis, motor and gear units
Interface of the CPX-CM-HPP for connection of the motor controller via
CAN bus.
Front unit controller as CPX module. Controller which can be integrated
into the CPX terminal.
CoDeSys controller as CPX module. Controller which can be integrated into
the CPX terminal.
Collective term for the various modules which can be integrated into a
CPX terminal.
Complete system consisting of CPX modules.
Digital input
Digital inputs and outputs
Functional earth
Provides the connection to specific fieldbuses. Transmits control signals to
the connected modules and monitors their functionality (as CPX module:
CPX bus node).
Festo Handling and Positioning Profile
Handheld terminal for commissioning and service purposes
Parameters which must be set so that the system can be operated.
XV