Festo CPX-CM-HPP Description page 95

A. Technical appendix
1: CM-HPP :M.Y.J
Sys: Force Mode enabled
Set
_____________________________________________________
() Home
() Jog neg
() Jog pos
() /Teach
State
MC ()
Ref ()
Warn ()
Fault ()
Teach Ack ()
_____________________________________________________
Back
1: CM-HPP :D _____
Diagnostics
X-Axis: 104-System error A
Y-Axis: No error
Z-Axis: No error
U-Axis: No error
_____________________________________________________
ßà
Back Detail
1: CM-HPP :D.X ___
Fault X-Axis: 104-44
44- Node Guarding
or Heart Beat
_____________________________________________________
Back Res fault
Festo CPX-CM-HPP-EN 2017-06b English
You can now carry out the following functions in the [Jog /
Ref / Teach (J) menu. In addition, the following some status
information is available:
Entry in CPX MMI
Home
Jog neg
Jog pos
/Teach
Set
MC
Ref
Warn
Fault
Teach Ack
The CPX error groups of the axes are displayed in the
[Diagnostics (D)] menu.
The CPX error group, error number and the error text for the
selected axis is displayed in the [Detail] menu.
For the description, refer to Section 4.2.3.
FHPP-Bit
CPOS.B2
CPOS.B4
CPOS.B3
CPOS.B5
SPOS.B2
SPOS.B7
SCON.B2
SCON.B3
SPOS.B3
A-9