Festo CPX-CM-HPP Description page 92

A. Technical appendix
1: CM-HPP
X-Axis: MTR-DCI
Y-Axis: CMMS-AS
Z-Axis: No Axis
U-Axis: No Axis
_____________________________________________________
Back OK
1: CM-HPP :M.X
Process state
_____________________________________________________
I: Enabled
I: Open
I: Warn
I: Fault
I: 24VL
I: Lock
I: OPM1
I: OPM2
I: /Halt
I: MC
I: Ref
O: Enable
O: /Stop
O: /Brake
O: Reset
O: Lock
O: OPM1
O: OPM 2
O: /Halt
_____________________________________________________
Back Force Mode
A-6
The current values of some of the inputs and outputs of the
connected motor controllers are displayed in the
[Monitoring/Forcing (M)] menu. The states of the inputs and
outputs can be forced with the "Force Mode" function.
The following I/O data is displayed for each axis:
Entry in CPX MMI
I: Enabled
I: Open
I: Warn
I: Fault
I: 24VL
I: Lock
I: OPM1
I: OPM2
O: Enable
O: /Stop
O: /Brake
O: Reset
O: Lock
O: OPM1
O: OPM2
O: /Halt
FHPP-Bit
SCON.B0
SCON.B1
SCON.B2
SCON.B3
SCON.B4
SCON.B5
SCON.B6
SCON.B7
CCON.B0
CCON.B1
CCON.B2
CCON.B3
CCON.B5
CCON.B6
CCON.B7
CPOS.B0
Festo CPX-CM-HPP-EN 2017-06b English