3. Commissioning
Festo CPX-CM-HPP-EN 2017-06b English
Format
Input and output format of the position value
Valid for:
–
Actual position
–
Setpoint position in direct operation
Warning
Danger of personal injury and material damage.
In the event of incorrect settings for format specifications,
the setpoint positions of the actual positions may deviate.
Check the format specifications carefully.
Value Format
0
32 bit [Ink]
1
32 bit [μm]
Significance
For motor controller CMMx-xx only:
Original 32 bit Long Integer from motor
controller. When the factor group for
motor controller CMMx-xx is used, this
32 bit value represents the path (e.g. μm)
depending on the resolution (e.g. 10
For motor unit MTR-DCI and motor
controller SFC-xx only:
The 32 bit position value is converted to
[μm] or [1/1000 °].
-3
).
3-23