Festo CPX-CM-HPP Description page 97

A. Technical appendix
Trace data
NB-FN-Pos-Day-h-m-s-ms
√ 0 107 1 000:0:2:57:13
_____________________________________________________
ßà
Back Detail
Trace data number 0
In fault Ch 1
System error A
Module position 1
CM-HPP: FHPP-Gateway
Days: 0
Hours: 0
Minutes: 2
Seconds: 57
Milliseconds: 13
_____________________________________________________
ßà
Back
Festo CPX-CM-HPP-EN 2017-06b English
The error memory is displayed in the [Trace Data] menu.
_
– Number of the entry (NB)
– Number of the CPX error group (FN)
– Module position (Pos)
– Timestamp in format Days:Hours:Minutes:
Seconds:Milliseconds (Day-h-m-s-ms) since the CPX
terminal was switched on
The following additional information about the current error is
displayed in the [Detail] menu.
– Channel number
– Designation of the CPX error group
– Module position
– Module designation
– Timestamp in format
Days:Hours:Minutes:Seconds:Milliseconds since
activation
Note
For additional information about the CPX-MMI handheld,
refer to the documentation CPX-MMI-1-...
A-11