Configuration Of The Cpx-Cm-Hpp - Festo CPX-CM-HPP Description

3. Commissioning
3.6

Configuration of the CPX-CM-HPP

3.6.1 Configuration parameters
Festo CPX-CM-HPP-EN 2017-06b English
For each module, 64 bytes are reserved for module
parameters that can be entered in the system table of
the CPX terminal. Function number 4828+m*64+0...63
(m = Module number in the CPX terminal).
Function number
4828 +m*64+6
4828+m*64+7
4828+m*64+8
4828 +m*64+9
4828 +m*64+10
4828 +m*64+11
4828 +m*64+12
4828 +m*64+13
4828 +m*64+14
4828 +m*64+15
4828 +m*64+16
4828 +m*64+17
1) No gaps are permitted in the list. Axis type = "No Axis" is the end
of the list.
Tab. 3/11: Function number 4828 – Configuration
parameter
The configuration parameters are stored in the EEPROM of
the CPX-CM-HPP. The Axis type and Node ID parameters are
not effective until the next restart. The stored configuration
Parameter entry
Axis type
Axis 1
Node ID
Format
Axis 2 Axis type
Node ID
Format
Axis 3 Axis type
Node ID
Format
Axis 4 Axis type
Node ID
Format
1)
1)
1)
1)
3-21