3. Commissioning
3.5.6 Specific settings for motor controller SFC-DC-...-CO
Menu/Tab
[Configuration]
[Controller] [Interface]
[Interface parameter]
Tab. 3/6:
Specific settings for motor controller SFC-DC-...-CO
3-18
Parameters
Controller type
CAN address
Bit rate
Data profile
Supply voltage
Value
SFC-DC-...-CO
CAN address of the axis,
see Tab. 3/1
1 Mbit/s
FHPP
Internal
With the "external" option, an
external supply voltage must
be connected at the CAN bus
plug, see system description of
motor controller.
Festo CPX-CM-HPP-EN 2017-06b English