Installation; General Instructions On Installation - Festo CPX-F8DE-P Manual

2. Installation

2.1

General instructions on installation

Festo P.BE-CPX-F8DE-P-E N en 1610a English
Warning
Electrical voltage
Injury caused by electric shock, damage to machine and to
system.
For the electrical power supply, only use PELV power
•
circuits in accordance with IEC 60204-1 (Protective
Extra­Low Voltage, PELV).
Note the general requirements of IEC 60204-1 in respect
•
of PELV­power circuits.
Use only voltage sources that guarantee a reliable elec­
•
tric disconnection of operating and load voltage in ac­
cordance with IEC 60204-1.
Always connect all of the power circuits for operating
•
and load voltage supplies U
Through the use of PELV circuits, protection from electric
shock (protection from direct and indirect contact) in accord­
ance with IEC 60204-1 is ensured (refer to Electrical Equip­
ment of Machines. General Requirements).
, U and U
EL/SEN VAL OUT
.
2-3