Dismantling And Mounting; Dismounting - Festo CPX-CM-HPP Description

2. Fitting and installation
2.2

Dismantling and mounting

1
CPX-CM-HPP
2
Interlinking block
3
Contact rails
4
Screws,
tightening torque
0.9 ... 1.1 Nm
Fig. 2/1: Dismounting/mounting the CPX-CM-HPP

2.2.1 Dismounting

2-4
The CPX-CM-HPP is mounted in an interlinking block of the
CPX terminal (see Fig. 2/1).
4
3
Dismount the CPX-CM-HPP as follows:
1. Loosen the 4 screws of the CPX-CM-HPP.
2. Pull the CPX-CM-HPP carefully and without tilting away
from the contact rails of the interlinking block.
Festo CPX-CM-HPP-EN 2017-06b English
1
2