Gp 6 Firmware Upgrade; Gp 7 Machine Specifications - Xerox WorkCentre 4150 Service Manual

GP 6 Firmware Upgrade

Purpose
To give details of the possible firmware upgrade procedures:
• Remote Machine
• Local Machine
Remote Machine
There are 2 methods to upgrade the firmware on networked machines, CentreWare Internet
Service (CWIS) and CentreWare Web.
NOTE: CentreWare Web can only be used by the System Administrator.
CentreWare Internet Service Method
1. Open Microsoft Internet Explorer. Enter the machines IP address.
2. Enter the machines IP address. Press return. The CentreWare Internet Services window
will open.
NOTE: Refer to GP 4 System Administration Tools to determine the machines IP
address.
3. Click on the Properties tab.
4. In the Properties window, click on Maintenance, then Firmware Upgrade.
5. Enter the customers username and password. The Firmware Upgrade window will open.
6. In the Firmware Upgrade window, select Browse.
7. Browse to the location of the firmware files. Select the correct firmware file.
8. Select Install Software. The firmware file will now be transmitted to the machine. The
machine will automatically initialize when the upgrade procedure is finished.
9. Check that the machine has been successfully upgraded.
Local Machine
ControlCentre Method
Use this method if the machine can be connected to a PC via a USB 2.0 port.
NOTE: The PC must have Windows 2000 or Windows XP and a USB 2.0 port.
1. Use a USB 2.0 cable to connect the PC to the machine.
NOTE: Cancel the Found New Hardware Wizard.
2. Open ControlCentre.
3. In the right window, under Maintenance, highlight Firmware Upgrade.
4. Select Setting.
5. In the Firmware Update window, select Browse.
6. Browse to the location of the firmware files. Select the correct firmware file.
7. Select Update. The firmware file will now be transmitted to the machine. The machine will
automatically initialize when the upgrade procedure is finished.
8. Check that the machine has been successfully upgraded.
WorkCentre 4150

GP 7 Machine Specifications

Specifications are correct at the time of publication. Machine specifications are subject to
change without notice. Refer to the following tables for machine specifications:
• Table 1 General Specifications.
• Table 2 Fax Specifications.
• Table 3 Scanner Specifications.
• Table 4 Copy Specifications.
• Table 5 Telephone Specifications.
• Table 6 Consumables.
• Table 7 Fuser Operating Temperatures.
• Table 8 HVPS Output.
• Table 9 Finisher Specifications
Table 1 General specifications
Item
Configuration
Operation System
Duplex Printing
Printing Speed
Paper Tray Capacity
Document Capacity (Input)
Paper Capacity (Output)
Interface
CPU
System Memory
Warming up Time
Absolute Storage Condition
Operating Condition
Recommended Operating Con-
dition
Dimension (W x D x H)
Weight
Acoustic Noise
Power Rating
Power Consumption
Power Save Consumption
Recommended System
Requirement
September 2006
6-17
Description
Desktop with 1 tray. Optional 2 or 4 trays. High stand for 1 or
2 trays. Low stand for 4 trays.
Win98/ME/NT 4.0/2000/XP/XP64bit/MAC/Unix/Linex and
Citrix.
Yes
45ppm for 8.5x11, 43ppm for A4
520 sheets (75gsm)
DADF: 50 Sheets (50-120gsm)
Output tray 500 sheets
Optional finisher 500 sheets (50 sheets stapled)
IEEE 1284 (ECP)
USB (without HUB mode)
400 MHz
128Mb (plus 16Mb for Fax) (scan to email adds 32Mb)
From power on: 30 Sec. From power save: 10 sec.
Temperature: -20C ~ 40C, Humidity: 10% RH ~ 90% RH
Temperature: 10C ~ 32C, Humidity: 20% RH ~ 80% RH
Temperature: 16C ~ 30C, Humidity: 30% RH ~ 70% RH
Basic: 610 x 465 x 607mm (24 x 13.3 x 23.8 inches)
Machine: 45Kg (99lb) (with CRU)
Tray 2: 11.85Kg (26lb)
Less than 62dB (Copy/Printing scanning mode)
110VAC-127VAC: 6A
220VAC-240VAC: 3A
Avg. 800W (Print/Copy)
Avg. 35W
Pentium IV 1.2 Ghz, 64Mb RAM
General Procedures and Information
GP 6, GP 7