Gp 6 Firmware Upgrade - Xerox Phaser 3635MFP Service Manual

Fax Options
This report shows the different options available for the fax and their current settings.
Billing/Meters
This report shows specific information about the machines total print count.
Auditron
This report shows the active electronic auditron group accounts and their current image
counters for each available service.
Xerox Standard Accounting
This report shows the user account activity. Reports are available for user accounts, general
accounts and group accounts.
All Accounting Reports
The machine will print the Auditron list and Xerox Standard Accounting list.
Email Confirmation
This report prints after connecting to the mail server.
All Email Reports
This function will print all available Email reports.
Draft 4
Phaser 3635MFP

GP 6 Firmware Upgrade

Purpose
To give details of the firmware upgrade procedure.
Procedure
The firmware upgrade is initiated locally from a USB thumbdrive through the standard thumb-
drive port.
Perform the following:
1. Load the firmware onto a USB thumbdrive.
2. Connect the USB thumbdrive to the standard thumbdrive port on the front of the machine.
3. Select Print from USB.
4. Select USB Drive.
5. From the displayed list, navigate to the relevant firmware file. Select the firmware file.
6. Select Add. The firmware file will be added to the print list.
7. Select Done. The print list will be displayed.
8. Select the firmware file to be downloaded to the machine. Select Add.
9. After the firmware has been upgraded, check that the correct version is displayed in
Machine Status. Refer to GP 3 Machine Status.
6-13
General Procedures and Information
GP 5, GP 6