Xerox WorkCentre 4150 Service Manual page 178

15. Remove the registration guide, Figure 6.
NOTE: The connectors in the registration guide can remain connected.
Figure 6 Registration guide removal
16. Remove the registration roll, Figure 7.
Figure 7 Registration roll removal
Repairs and Adjustments
REP 8.2
17. Remove the front registration idler roll bearing, Figure 8.
1
Remove 2 screws.
2
Remove the registration guide.
1
Remove the registration
roll.
September 2006
4-34
1
Remove the E-clip,
then the bearing.
Figure 8 Front bearing removal
WorkCentre 4150