Xerox WorkCentre 4150 Service Manual page 81
All-in-one laser mfp a3
Hide thumbs
Also See for WorkCentre 4150:
- Service manual (631 pages) ,
- User manual (201 pages) ,
- Installation instructions manual (40 pages)
Table of Contents
Advertisement
05-920 DADF Door Open RAP
05-920 The machine has detected that the DADF door is open.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 11. Perform the following:
1.
Open the DADF top cover assembly, PL 5.15 Item 11. Check that the DADF door open
switch actuator on the top cover, PL 5.15 Item 22 is not missing or damaged. Install new
components as necessary, PL 5.15.
2.
Enter dC330 code 05-160. Check the DADF door open switch (S05-160), PL 5.25 Item 8.
3.
Check the wiring between the DADF door open switch and CN6 on the DADF PWB. If
necessary, install a new DADF door open switch, PL 5.25 Item 8.
4.
If necessary, install new components:
•
DADF PWB, PL 5.20 Item 6.
•
Document transport assembly, PL 5.10 Item 2.
WorkCentre 4150
05-930 DADF Exit Door Open RAP
05-930 The machine has detected that the DADF exit door is open.
Procedure
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 11. Perform the following:
1.
Raise the DADF input tray, PL 5.10 Item 5. Open the DADF exit assembly, PL 5.20 Item
26. Check that the DADF exit sensor actuator is not missing or damaged. Install new
components as necessary, PL 5.20.
2.
Enter dC330 code 05-180. Check the DADF exit open sensor (Q05-180), PL 5.20 Item
16.
3.
Check the wiring between the DADF exit open sensor and CN6 on the DADF Sensor
PWB. If necessary, install a new DADF exit open sensor, PL 5.20 Item 16.
4.
Check the wiring between CN1 on the DADF Sensor PWB and CN3 on the DADF PWB.
5.
If necessary, install new components:
•
DADF PWB, PL 5.20 Item 6.
•
DADF sensor PWB, PL 5.20 Item 4.
•
Document transport assembly, PL 5.10 Item 2.
September 2006
2-23
WARNING
Status Indicator RAPs
05-920, 05-930
Advertisement
Chapters
Table of Contents
