Xerox WorkCentre 4150 Service Manual page 193

5. Prepare to remove the pressure roller bearings, Figure 4.
1
Remove 3 screws, then
the input guide.
Figure 4 Preparation
WorkCentre 4150
6. Remove the pressure roller bearings, Figure 5.
4
Remove the rear
bearing.
2
Remove 1 screw, then the
front jam lever.
September 2006
4-49
3
Remove the
pressure roller.
2
1
Remove the front
bearing.
Release the front
bracket.
Figure 5 Pressure roller bearing removal
Repairs and Adjustments
REP 10.5