Xerox WorkCentre 4150 Service Manual page 249

PL 10.25 Fuser (1 of 2)
Item Part Description
1 002N02557 Fuser assembly (See Note) (REP
10.1)
2 130N01463 Thermostat assembly
3 031N00217 Stripper finger assembly
4 – Stripper finger (P/O PL 10.25 Item
3)
5 – Finger holder (P/O PL 10.25 Item 3)
6 – Spring (P/O PL 10.25 Item 3)
7 009N01595 Spring (REP 10.5)
8 152N11708 Connector
9 130N01462 Thermistor assembly
10 120N00487 Fuser exit sensor assembly
11 – Actuator cradle (P/O PL 10.25 Item
10)
12 – Actuator (P/O PL 10.25 Item 10)
13 – Spring (P/O PL 10.25 Item 10)
14 – Fusing unit (P/O PL 10.25 Item 1)
15 152N11709 AC Fuser harness
NOTE: This is a HFSI. To reset the HFSI count, go to GP 16.
WorkCentre 4150
September 2006
5-27
Parts Lists
PL 10.25