Xerox WorkCentre 4150 Service Manual page 113

14-100 CCD Lock RAP
14-100 The machine has detected a mechanical fault with the CCD module.
Procedure
WARNING
Switch off the electricity to the machine. Disconnect the power cord from the customer
supply while performing tasks that do not need electricity. Electricity can cause death or
injury. Moving parts can cause injury.
Refer to Wiring Diagram 9. Perform the following:
1. If necessary, remove the finisher, REP 12.1. Check that the scanner lock, PL 14.10 Item
20 is completely unlocked.
2. Remove the scanner top cover assembly, refer to REP 14.2.
3. Check that the CCD module, PL 14.10 Item 2 moves freely from left to right.
4. Check the wiring between the scanner drive motor, PL 14.10 Item 4 and CN2 on the
Scanner PWB.
5. If necessary, install new components:
• Scanner drive motor assembly, PL 14.10 Item 4.
• Scanner PWB, PL 14.10 Item 15.
• CCD module, PL 14.10 Item 2.
• Scanner assembly, PL 14.10 Item 1.
WorkCentre 4150
September 2006
2-55
Status Indicator RAPs
14-100