Xerox WorkCentre 4150 Service Manual page 239

PL 7.30 Bypass Tray and Side Cover
Assembly (1 of 3)
Item Part Description
1 002N02561 Side cover assembly (REP 8.1)
2 – E-Clip (P/O PL 7.30 Item 1)
3 – Collar (P/O PL 7.30 Item 1)
4 005N01088 Duplex feed clutch (CL08-860)
5 007N01530 Belt
6 020N00829 Duplex pulley
7 – Bearing (P/O PL 7.30 Item 1)
8 – Ground strip (P/O PL 7.30 Item 1)
9 – Ground harness (P/O PL 7.30 Item
1)
10 022N02274 Duplex feed roll 2
11 – Duplex guide (P/O PL 7.30 Item 1)
12 022N02275 Duplex feed roll 1
13 009N01366 Latch spring
14 003N01017 Rear latch
15 – Shaft (P/O PL 7.30 Item 1)
16 – Handle (P/O PL 7.30 Item 1)
17 003N01016 Latch front
18 130N01274 Duplex jam 1 sensor (Q08-700)
19 – Sensor holder (P/O PL 7.30 Item 1)
20 – Actuator (P/O PL 7.30 Item 1)
21 009N01597 Spring
22 – Duplex side guide (P/O PL 7.30
Item 1)
23 009N01598 Spring
24 – Duplex exit guide (P/O PL 7.30
Item 1)
25 – Side cover (P/O PL 7.30 Item 1)
26 – Bypass tray (REF: PL 7.40 Item 1)
27 – Label (P/O PL 7.30 Item 1)
28 – Duplex assembly (REF: PL 7.35
Item 1)
29 120N00500 Actuator assembly
WorkCentre 4150
September 2006
5-17
Parts Lists
PL 7.30