Xerox WorkCentre 4150 Service Manual page 240

PL 7.35 Bypass Tray and Side Cover
Assembly (2 of 3)
Item Part Description
1 002N02576 Duplex assembly
2 – Grounding brush (P/O PL 7.35 Item
1)
3 115N00860 Static eliminator
4 – Duplex guide (P/O PL 7.35 Item 1)
5 009N01599 Spring
6 022N02234 Duplex idler roll
7 115N00864 Spring clip
8 – Ground harness assembly (P/O PL
7.35 Item 1)
9 – Ground harness (P/O PL 7.35 Item
1)
10 – Double sided tape (P/O PL 7.35
Item 1)
11 – Transfer ground strip (P/O PL 7.35
Item 1)
12 – Detack ground strip (P/O PL 7.35
Item 1)
13 – Ground strip (P/O PL 7.35 Item 1)
14 – Feed guide (P/O PL 7.35 Item 1)
15 – Damper bracket (P/O PL 7.35 Item
1)
16 127N07485 Duplex fan 1
17 127N07495 Duplex fan 2
18 022N02277 Transfer roll assembly (See Note)
19 022N02235 Transfer roll (See Note)
20 115N00863 Bush
– 013N00537 Bush (Alternative part)
21 – Gear (P/O PL 7.35 Item 18)
22 019N00913 Retainer
23 009N01600 Spring
24 – E-Clip (P/O PL 7.35 Item 19)
25 009N01601 Spring plate
26 019N00914 Retainer
27 016N00289 Bush
28 – Harness cover (P/O PL 7.35 Item 1)
29 – Side cover (REF: PL 7.30 Item 1)
30 152N11710 Duplex harness
NOTE: This is a HFSI. To reset the HFSI count, go to GP 16.
Parts Lists
PL 7.35
September 2006
5-18 WorkCentre 4150