Xerox WorkCentre 4150 Service Manual page 208

6. Prepare to remove the stacker tray motor assembly, Figure 2.
2
Remove the pin.
1
Remove E-clip, then gear.
Figure 2 Preparation
Repairs and Adjustments
REP 12.9
7. Remove the stacker tray motor assembly, Figure 3.
1
Remove 2 screws.
Figure 3 Stacker tray motor assembly removal
8. If necessary, remove 1 E-clip, then the pinion gear, PL 12.45 Item 17.
9. Remove components from the stacker motor assembly as necessary:
• Stacker motor, PL 12.45 Item 20.
• Stacker motor belt, PL 12.45 Item 29.
• Worm wheel, PL 12.45 Item 24.
• Worm gear, PL 12.45 Item 22.
Replacement
Replacement is the reverse of the removal procedure.
September 2006
4-64
2
Remove the stacker tray
motor assembly.
WorkCentre 4150