18. Remove the guides, Figure 17.
1
Remove 2 screws, then the
left guide.
Figure 17 Guide removal
WorkCentre 4150
19. Remove the drive gear cover, Figure 18.
2
Remove 2 screws,
then the right guide.
1
Disconnect the registration clutch inline connector.
September 2006
4-17
3
Remove the registration clutch, drive gear,
shaft and 2 bearings.
2
Remove 4 screws, then the
drive gear cover.
Figure 18 Drive gear cover removal
Repairs and Adjustments
REP 5.1