Xerox WorkCentre 4150 Service Manual page 168

5. Prepare to remove the tray 1 feed assembly, Figure 3.
1
Remove the 4 screws.
Figure 3 Preparation
6. Open the side cover assembly, PL 7.30 Item 1.
Repairs and Adjustments
REP 7.1
7. Remove the tray 1 feed assembly, Figure 4.
2
Disconnect the harness from the
tray 1 stack height sensor and the
tray 1 paper empty sensor.
Remove the tray 1 feed assembly.
Figure 4 Remove the tray 1 feed assembly
September 2006
4-24
1
Use a flat bladed screwdriver to push the
back right dowel through the machine
frame.
WorkCentre 4150