Xerox WorkCentre 4150 Service Manual page 111

e. If the staples have been partially formed, install a new stapler assembly, PL 12.35
Item 2.
f. If the staples have not been partially formed, install a new stapler cartridge, PL 12.35
Item 4. Repeat the check. If the first two staples are not partially formed, install a new
stapler assembly, PL 12.35 Item 2.
8. If necessary, install a new finisher PWB, PL 12.10 Item 8.
Figure 1 Staple cartridge open
WorkCentre 4150
Forming plate open
Primed staples
September 2006
2-53
Forming plate
fully closed
Figure 2 Staple cartridge closed
Status Indicator RAPs
12-750