Changing Settings In The Menu; Leaving Endo Mode - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.12 Using the KL 703 LED in ENDO mode (optional accessory)
▶ Push 4-way button on the foot control upward in order to switch to counter-
clockwise rotation.
Torque mode Autorev / Forward
▶ Press the foot pedal.
ð
The motor starts by rotating clockwise (if not selected otherwise)
When the set torque is reached, a signal sound is emitted, and the motor
switches to counterclockwise rotation. After the set time, the motor automatic-
ally reverts to clockwise rotation. The time can be set in the option menu (Op-
tion 3).
See also:
2 4.8.6 ENDO menu (optional), Page 68
Note
The motor's rotational direction can be reversed with the cross-switch on the
footswitch in all torque modes.
▶ To stop this, release the foot pedal.
▶ Press the foot pedal.
ð
The motor rotates clockwise again.

4.12.4 Changing settings in the menu

See also:
2 ENDO menu (optional)

4.12.5 Leaving ENDO Mode

▶ Press the "Additional motor drives" key.
or
96 / 134