KaVo ESTETICA E30 Instructions For Use Manual page 49

"AP 1" button: treatment position, e.g. for lower jaw treatment
"AP 2" button: treatment position, e.g. for upper jaw treatment
"Collape position" button: collapse position
▶ Move the chair to the desired position.
▶ To save the chair position, press "AP 0", "AP 1", "AP 2", "SP" or "Collapsed
position" button until you hear a signal.
ð
The display diode of the pressed button is turned on. The chair position is
saved.
See also:
2 Manual positioning of the patient chair using the MEMOdent control element
Last position
After the "LP" button is pressed, the chair moves into its position before the
"SP" button was pressed.
Note
The memory is erased when you turn off the device. After turning on the
device again (for example in the morning or after lunch), the chair does not
execute a specific movement when you press the "LP" button.
Recalling automatic positions with the assistant unit
▶ Briefly press the "AP" key.
ð
The LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for ap-
proximately four seconds.
▶ During these four seconds, briefly press the "AP 0", " AP 1", " AP 2", "SP" or
"LP" key.
ð
The chair moves into the selected automatic position.
Saving automatic positions with the assistant unit
Note
The automatic position "Last position" is saved on the "LP" button. Press the
"LP" button for the chair to automatically move to the last position before the
rinsing position. The "LP" button cannot be assigned to another automatic
position.
▶ Move the chair to the desired position.
▶ Briefly press the "AP" key.
ð
The LEDs of the "AP 0", " AP 1", " AP 2", "SP", and "LP" keys flash for ap-
proximately four seconds.
4 Operation | 4.3 Adjusting the dental chair
49 / 134
Instructions for use ESTETICA E30