Open Endo Mode - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.12 Using the KL 703 LED in ENDO mode (optional accessory)
Excessive torque.
Injury or damage to instruments.
▶ Use root canal instruments in ENDO mode only.
Technical specifications for the KL 703 LED in ENDO
mode
Note
The technical specifications apply to the KL 703 LED in ENDO mode.LED
Speed range
Maximal torque
Operating mode
Note
30 seconds operating time/9 minutes pause is the potential load threshold of
the motor (full load at maximum speed).
In practice, pulse loads lasting seconds or pause times lasting seconds or
minutes are realistic given that the maximum possible motor current is not nor-
mally reached. This equates to the dentist's normal way of working.

4.12.2 Open ENDO mode

▶ Remove the endomotor INTRA LUX KL 703 LED from the holder.
▶ Press the "Additional motor drives" key.
ð
The display switches to the "ENDO" menu.
The device exits from Endo mode as soon as the INTRA LUX KL 703 LED endo-
motor is returned to the holder. The Endo mode is activated automatically once
the endomotor is removed, providing that the Endo mode was previously ended
by putting the endomotor back in place.
Note
The device does not automatically start when endo mode was left by pressing
the "Motorised auxiliary drives" button, or if endo mode has never been ac-
tivated since the last time the unit was turned on.
A service technician can deactivate the automated start.
Note
Before using the endomotor, always check the speed and transfer ratio.
CAUTION
200 to 3,200 min
2.5 Ncm
94 / 134
-1