KaVo ESTETICA E30 Instructions For Use Manual page 66

Instructions for use ESTETICA E30
4 Operation | 4.8 Using functions through the menu
The display depends on which instrument was withdrawn.
Changing motor settings in the menu
Note
Following instructions for use, service instructions and installation instructions
in the instrument packaging.
Motor status
The status of a handpiece is displayed on the display or control keys once a
handpiece is taken out.
S1
S2 S3
Setting
Motor speed
Light intensity
Direction of motor rota-
tion
Spray status
Adjusting the motor
▶ Settings can be changed using the corresponding keys on the control panel
or on the foot control.
Motor speed is set with the foot control only.
The direction of motor rotation, cooling status and light intensity are set
with the foot control or the control keys.
ð
The current settings are saved and activated the next time the handpiece is
taken out.
PIEZOsoft/PiezoLED
Note
The setting of the mode is only available in combination with a PiezoLED Ul-
trasonic Scaler. The PiezoLED menu and all PiezoLED functions are only avail-
able if a PiezoLED license is existent.
Setting the PIEZOsoft
The status of the handpiece is shown on the display when the PIEZOsoft is be-
ing taken out:
▪ Intensity
S4
Actuation
Foot control
Foot control, control keys Display
Foot control, control keys LED control keys
Foot control, control keys LED control keys
66 / 134
Pane
Display