Instructions for use ESTETICA E30
4 Operation | 4.8 Using functions through the menu
S1
S2
S3
Key
Settings
S1
Saves the parameters.
Selects the ENDO menu.
S2
Changes the value.
S3
Changes the value.
S4
Moves the flashing cursor:
Torque mode, speed, torque, torque mode, ... (ring counter).
Set torque mode
▶ The torque mode parameter can be changed after selecting it in the settings
menu.
ð
The selected parameter is marked by a flashing cursor on the display.
S1
S2
S3
Key
Settings
S1
Saves the parameters
Selects the ENDO menu
S2
Changes the torque mode
Autoreverse, Torque Control only, Autorev. / Forward, Autoreverse,..
(ring counter)
S3
Changes the torque mode
Autoreverse, Autorev. / Forward, Torque Control only, Autoreverse,..
(ring counter)
S4
Moves the flashing cursor
Setting the speed
▶ The speed parameter can be changed after selecting it in the settings
menu.
ð
The selected parameter is marked by a black triangle on the display.
S1
S2
S3
S4
S4
S4
70 / 134