KaVo ESTETICA E30 Instructions For Use Manual page 80

Instructions for use ESTETICA E30
4 Operation | 4.9 Using function through the dentist or assistant unit
▪ Dimmed light: approx. 4,000 Kelvin; equivalent to the light of a halogen op-
erating lamp
▪ Laser mode: Light mode, which has no negative influence on the KaVo KEY
Laser III, the KEY Laser 3+ or the KaVo DIAGNOdent.
When operated In dimmed mode, the LED lamp functions according to a
dimmed halogen lamp. The colour temperature is approx. 4,000 K and the
composite can harden prematurely. This can have a negative impact on the
durability of the treatment.
The COMPOsave modes prevents the composite from hardening prematurely.
As opposed to the dimmed light, the blue components of the light are filtered in
the process. Therefore the composite can be processed longer in COMPOsave
mode.
▶ Press the "Mode/colour temperature" button
ð
The treatment light switches from COMPOsave mode to dimmed normal
light.
▶ Press the "Mode/colour temperature" button once again.
ð
The treatment light switches back to COMPOsave mode.
ð
The COMPOsave mode can be recognised by the yellow light.
Switch on COMPOsave mode
When operated In dimmed mode, the LED lamp functions according to a
dimmed halogen lamp. The colour temperature is approx. 4,000 K and the
composite can harden prematurely. This can have a negative impact on the
durability of the treatment.
The COMPOsave modes prevents the composite from hardening prematurely.
As opposed to the dimmed light, the blue components of the light are filtered in
the process. Therefore the composite can be processed longer in COMPOsave
mode.
Note
The COMPOsave mode switches on. when the "Dim operating light" button is
activated. The light can be dimmed in COMPOsave mode.
80 / 134