KaVo ESTETICA E30 Instructions For Use Manual page 82

Instructions for use ESTETICA E30
4 Operation | 4.9 Using function through the dentist or assistant unit
Set colour temperature
Note
The colour temperature of the treatment light KaVoLUX 540 LED T can be is
set between five stages with the "Mode/Colour temperature" button. The
visual perception of the teeth can be adapted or enhanced by changing the
colour temperature.
4.000 to 4.500 Kelvin: similarity to halogen light
5.500 Kelvin: daylight quality
▶ Press and hold down the "Mode/colour temperature" button
ð
Colour temperature changes in five steps.
▶ Release the button when the desired colour temperature is achieved.
Turning the laser mode On and Off
Note
The "laser mode" function is available only from the following version:
- Operating light V1.2.1
Older versions must be updated prior to download.
Note
Falsified colour reproduction: the laser mode only possesses a restricted
spectrum output. Therefore a colour comparison should not be carried out in
laser mode.
In laser mode, another light mode is generated, which has no negative influ-
ence on the KaVo KEY Laser III, the KEY Laser 3+ or the KaVo DIAGNOdent.
Sensor KaVoLUX 540 LED
▶ Press the „operating light" button and the "operating light dimming" button
on the operating light simultaneously.
ð
The laser mode switches on.
82 / 134