KaVo ESTETICA E30 Instructions For Use Manual page 79

4 Operation | 4.9 Using function through the dentist or assistant unit
▶ Press the "Operating light" button on the dentist or assistant element.
ð
The operating light is switched on in its most recent active state: operating
light on, COMPOsave mode on or dimmed light.
▶ Press the "operating light" button once again.
ð
Operating light is switched off.
A sensor can be used to switch the operating light on or off as follows:
Sensor KaVoLUX 540 LED
▶ Put your hand just in front of the sensor of the operating light.
ð
Operating light is switched on.
▶ Again put your hand just in front of the sensor of the operating light.
ð
Operating light is switched off.
Setting the brightness
Note
The maximum possible brightness of the light is set in five steps using the
"Treatment light" key.
▶ Press and hold down the "operating light" button.
ð
Brightness varies between five stages.
▶ When the desired brightness is reached, release the "Treatment light" key.
Changing between COMPOsave mode res. dimmed light
and normal light
The KaVoLUX 540 LED operating light can be used in the following modes:
▪ Normal light: preset at 5,500 Kelvin and 30,000 Lux corresponding to day-
light quality
▪ COMPOsave-Modus: enables longer processing periods for composites by fil-
tering the blue components of the light
79 / 134
Instructions for use ESTETICA E30