4 Operation | 4.9 Using function through the dentist or assistant unit
ð
Laser mode is activated: the operating light shines for 1 second in green
and then changes to a white light.
or
▶ Hold your hand in front of the sensor for 3 sec.
ð
The laser mode switches on.
ð
Laser mode is activated: the operating light switches initially in COMPOsave
mode and then shines for 1 second in green and then changes to a white
light.
Operation of the 3D joint
▶ Turn the switching ring to the left until it snaps into place.
ð
Treatment light can be rotated 45° to the left or 45° to the right.
▶ Turn the switching ring to the right and it will spring back to its original pos-
ition.
ð
If the treatment light is turned to the centre position (zero position), it will
automatically lock into place in the centre position.
4.9.3 Using the illumination functions for EDI and MAIA
▶ Press the "operating light" key briefly to turn the operating light on or off.
4.9.4 Using the X-ray viewer
▶ Press the "X-ray viewer" key to turn the X-ray viewer on or off.
83 / 134
Instructions for use ESTETICA E30