Changing Settings In The Menu; Exiting Endo Mode; Using The Usb Interface - KaVo ESTETICA E30 Instructions For Use Manual

Instructions for use ESTETICA E30
4 Operation | 4.13 Using the USB interface
4 To stop this, release the foot pedal.
4 Press the foot pedal.
ð The motor rotates clockwise again.

4.12.4 Changing settings in the menu

Also refer to:
4.8.6 ENDO menu (optional), Page 65

4.12.5 Exiting ENDO mode

4 Press the "Additional motor drives" key.
or
4 Place the INTRA LUX KL 703 LED back in the holder.
NOTE
If the unit was switched to "Instant ENDO" mode, ENDO mode is only inter-
rupted when the ENDO motor is placed in the holder, and it is continued when
the ENDO motor is removed.
The function can be set by the service technician.
Also refer to:
4.12.2 Calling up ENDO mode, Page 89

4.13 Using the USB interface

Electrical power.
Electrical shock.
4 Set up the external PC outside of the patient environment keeping a min-
imum distance of 1.5 m.
4 Connect the PC and equipment connected to the PC in accordance with IEC
60601-1 / 62368.
CAUTION
91 / 124