KaVo ESTETICA E30 Instructions For Use Manual page 78

Instructions for use ESTETICA E30
4 Operation | 4.9 Using function through the dentist or assistant unit
Note
The KaVoLUX 540 LED T cannot be operated through the control functions of
the treatment centre. The operating light an only be switched on and off.
The KaVoLUX 540 LED operating light can be used in the following modes:
▪ Normal light: preset at 5,500 Kelvin and 30,000 Lux corresponding to day-
light quality
▪ COMPOsave mode: Enables longer working times for composites by filtering
the blue components of the light (compatible mode for light-activatable res-
toration materials).
▪ Dimmed light: approx. 4,000 Kelvin; equivalent to the light of a halogen op-
erating light
▪ Laser mode: Light mode with no detrimental effect on the KaVo KEY Laser
III, the KEY Laser 3+ or the KaVo DIAGNOdent
When operated In dimmed mode, the LED lamp functions according to a
dimmed halogen lamp. The colour temperature is approx. 4,000 K and the
composite can harden prematurely. This can have a negative impact on the
durability of the treatment.
The COMPOsave modes prevents the composite from hardening prematurely.
As opposed to the dimmed light, the blue components of the light are filtered in
the process. Therefore the composite can be processed longer in COMPOsave
mode.
Control panel KaVoLUX 540 LED T
① "Treatment lamp" key
③ "Mode/ colour temperature" button
Turning the operating light On and Off
The KaVoLUX 540 LED operating light can be used in the following modes:
▪ Normal light: preset at 5,500 Kelvin and 30,000 Lux corresponding to day-
light quality
▪ COMPOsave-Modus: enables longer processing periods for composites by fil-
tering the blue components of the light
▪ Dimmed light: approx. 4,000 Kelvin; equivalent to the light of a halogen op-
erating lamp
▪ Laser mode: Light mode, which has no negative influence on the KaVo KEY
Laser III, the KEY Laser 3+ or the KaVo DIAGNOdent.
② "Treatment lamp dimming" key
78 / 134