KaVo ESTETICA E30 Instructions For Use Manual page 81

4 Operation | 4.9 Using function through the dentist or assistant unit
Sensor KaVoLUX 540 LED
▶ Press the "operating light" button.
or
▶ Hold your hand in front of the sensor for 2 sec.
ð
The COMPOsave mode or dimmed light switches on.
ð
The COMPOsave mode can be recognised by the yellow light.
▶ Press the "Dim operating light" button once again.
or
▶ Hold your hand in front of the sensor for 2 sec.
ð
The treatment light switches back to normal light mode.
Setting the brightness of the dimmer
Note
The brightness of the light is set in five stages using the "Dim treatment
light" key.
Note
The time it takes for composites to harden is dependent on the brightness or
the effective radiation intensity of the light: The processing time is reduced
with increasing brightness / effective radiation intensity. The processing time
for composites is prolonged with reducing brightness / effective radiation in-
tensity.
▶ Press and hold down the "Dim operating light" button.
ð
Brightness is increased in five stages.
▶ Release the "Dim operating light" button when the desired brightness is
achieved.
81 / 134
Instructions for use ESTETICA E30