Operation
Operation
Troubleshooting
Troubleshooting
▶
Attach the KaVo instrument to the motor until it locks in place.
▶
Pull on it to make sure that the instrument is securely attached to the motor.
5 5 .4 Removing the attachment instrument from the drive motor
▶
Pull the instrument off the motor in axial direction through a slight rotating motion.
5.5 Regulating the speed and changing the direction of rotation
▶
Rotate the regulating sleeve to regulate between idle ② in clockwise rotation ① or counter‐
clockwise rotation ③ and maximal speed in a continuous manner.
6 6 Troubleshooting
6.1 Check for malfunctions at initial startup
CAUTION
Missing or damaged O-rings.
Malfunctions and premature failure.
▶
Make sure that all O-rings are on the coupling and undamaged.
Note
Stop working if the O-ring is missing or damaged.
The motor runs too hot under load:
▶
Also check the handpiece.
When the speed drops or is uneven:
▶
Check the hose connection.
35
36
37
38