Siemens RUGGEDCOM ROX II User Manual page 775

Hide thumbs Also See for RUGGEDCOM ROX II:
Table of Contents

Advertisement

RUGGEDCOM ROX II
CLI User Guide
Time Services
RUGGEDCOM ROX II offers the following time-keeping and time synchronization features:
• Local hardware time keeping and time zone management
• NTP (Network Time Protocol) client and server
CONTENTS
Section 17.1, "Configuring the Time Synchronization Settings"
Section 17.2, "Configuring the System Time and Date"
Section 17.3, "Configuring the System Time Zone"
Section 17.4, "Configuring the Local Time Settings"
Section 17.5, "Enabling and Configuring the NTP Service"
Section 17.6, "Viewing the NTP Service Status"
Section 17.7, "Viewing the Status of Reference Clocks"
Section 17.8, "Managing NTP Servers"
Section 17.9, "Managing NTP Broadcast/Multicast Clients"
Section 17.1
Configuring the Time Synchronization Settings
To configure the time synchronization settings, do the following:
1.
Configure the system time and date. For more information, refer to
Time and
Date".
2.
Configure the system time zone. For more information, refer to
Zone".
3.
Configure the local time settings. For more information, refer to
Settings".
4.
If multicast addresses will be configured for the NTP server, enable and configure the NTP multicast client. For
more information, refer to
5.
If broadcast addresses will be configured for the NTP server, enable and configure the NTP broadcast client.
For more information, refer to
6.
Add remote NTP servers. For more information, refer to
7.
Add broadcast/mutlicast addresses for the NTP server. For more information, refer to
"Adding a Broadcast/Multicast
8.
If required, add server authentication keys. For more information, refer to
Key".
Configuring the Time Synchronization Settings
Section 17.9.1, "Enabling and Configuring NTP Multicast
Section 17.9.2, "Enabling and Configuring NTP Broadcast
Address".
Section 17.2, "Configuring the System
Section 17.3, "Configuring the System Time
Section 17.4, "Configuring the Local Time
Section 17.8.3, "Adding an NTP
Section 17.8.5.2, "Adding a Server
Chapter 17
Time Services
Clients".
Clients".
Server".
Section 17.9.3.2,
729

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents