Siemens RUGGEDCOM ROX II User Manual page 583

RUGGEDCOM ROX II
CLI User Guide
Where:
• vrf is the name of the chosen VRF
3. Configure the following parameter(s) as required:
Parameter
metric-type { metric-type }
metric { metric }
route-map { route-map }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 13.9.8.3
Deleting a Redistribution Metric
To delete a redistribution metric for dynamic OSPF routes, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the metric by typing:
• For Standard OSPF Routes
no routing ospf redistribute [ bgp | rip | connected | static | kernel ]
• For VRF Routes via OSPF
no routing ospf vrf vrf redistribute [ bgp | rip | connected | static | kernel ]
Where:
• vrf is the name of the chosen VRF
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 13.9.9
Managing Routing Interfaces
This section describes how to manage interfaces for OSPF routes.
CONTENTS
• Section 13.9.9.1, "Viewing a List of Routing Interfaces"
• Section 13.9.9.2, "Configuring a Routing Interface"
Deleting a Redistribution Metric
Synopsis: An 8-bit signed integer between 1 and 2
Default: 2
The OSPF exterior metric type for redistributed routes.
Synopsis: A 32-bit unsigned integer between 0 and 16777214
The metric for redistributed routes.
Synopsis: A string
The route map name.
Unicast and Multicast Routing
Description
Chapter 13
537