Siemens RUGGEDCOM ROX II User Manual page 752

Chapter 16
Traffic Control and Classification
Parameter
op-chain { op-chain }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Configuring a Continue Mark
1. Make sure the CLI is in Configuration mode.
2. Select the Continue option by typing:
qos traffic-control advanced-configuration tcrules name mark-choice continue
Where:
• name is the name of the traffic control rule
3. Configure the following parameter(s):
Parameter
continue-chain { continue-chain }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Configuring a DSCP Mark
1. Make sure the CLI is in Configuration mode.
2. Select the DSCP Marking option by typing:
qos traffic-control advanced-configuration tcrules name mark-choice dscpmarking
Where:
• name is the name of the traffic control rule
3. Configure the following parameter(s):
Parameter
dscp-mark { dscp-mark }
dscpchain { dscpchain }
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
706
Synopsis: { forward, prerouting }
Default: forward
A chain in which the operation will take place.
Synopsis: { forward, prerouting }
Default: forward
A chain in which the operation will take place.
Synopsis: { BE, AF11, AF12, AF13, AF21, AF22, AF23, AF31, AF32, AF33, AF41, AF42,
AF43, CS1, CS2, CS3, CS4, CS5, CS6, CS7, EF }
A DSCP class value chosen amongst the given list.
Synopsis: { forward, postrouting, prerouting }
Default: forward
A chain where the DSCP marking will take place.
Description
Description
Description
Configuring QoS Marking
RUGGEDCOM ROX II
CLI User Guide