Siemens RUGGEDCOM ROX II User Manual page 254

Chapter 6
Security
Parameter
other { other }
all
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
4.
Section 6.9.15.4
Configuring the Destination Zone
To configure the destination zone for a firewall rule, do the following:
1. Make sure the CLI is in Configuration mode.
2. Configure the following parameter(s) as required:
Parameter
predefined-zone { predefined-zone }
other { other }
all
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 6.9.15.5
Deleting a Rule
To delete a rule, do the following:
1. Make sure the CLI is in Configuration mode.
2. Delete the rule by typing:
no security firewall fwconfig firewall fwrule rule
Where:
• firewall is the name of the firewall
• rule is the name of the rule
Type commit and press Enter to save the changes, or type revert and press Enter to abort.
3.
Section 6.9.16
Validating a Firewall Configuration
To validate a firewall configuration, do the following:
1. Make sure the CLI is in Configuration mode.
208
Synopsis: A string
Type a custom definition - this can be a comma-separated list of zones.
All zones
Synopsis: A string
A pre-defined zone
Synopsis: A string
An undefined zone (string).
All zones
Description
Description
Configuring the Destination Zone
RUGGEDCOM ROX II
CLI User Guide