Siemens RUGGEDCOM ROX II User Manual page 446

Chapter 12
Tunneling and VPNs
Parameter
rx-packets
rx-errors
rx-drops
tx-packets
tx-errors
tx-drops
Section 12.7.2
Viewing a List of GRE Tunnels
To view a list of GRE tunnels, type:
show running-config tunnel gre
If GRE tunnels have been configured, a table or list similar to the following example appears:
ruggedcom# show running-config tunnel gre | tab
IF
NAME LOCAL IP
-------------------------------------------------------------------------
gre 172.16.17.18
If no GRE tunnels have been configured, add tunnels as needed. For more information, refer to
"Adding a GRE Tunnel".
400
• Up - GRE tunnel is up and running;
• Down - GRE tunnel interface is inactive or tunnel remote endpoint is not reachable;
• Keepalives Disabled - Keepalive messages have been disabled, not able to know if the
tunnel remote endpoint is reachable or not
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The number of packets received through the tunnel.
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The error packets received through the tunnel.
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The number of packets dropped by the tunnel.
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The number of packets transmitted through the tunnel.
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The number of error packets transmitted through the tunnel.
This parameter is mandatory.
Synopsis: A 64-bit unsigned integer
The number of packets dropped by the tunnel.
This parameter is mandatory.
REMOTE IP REMOTE NET
172.19.20.21 192.168.2.0/24
Description
MTU MULTICAST COST
1476 - 0
RUGGEDCOM ROX II
CLI User Guide
Section 12.7.3,
Viewing a List of GRE Tunnels