Ip Address; Ip Subnet Mask - Vidicode Octo Manual

Use DHCP server:
NEXT
DHCP server enabled
• Press NEXT to save and move on to the next menu item.
When a DHCP server is used, the IP and Gateway addresses are
automatically assigned. Without DHCP server you must manually enter IP
address, as indicated in section 8.8.

11.7 IP address

As part of the network the Call Recorder needs an IP address. In case a
DHCP server is used (see previous item) the DHCP server will assign the
Call Recorder an IP address. In case a DHCP server is not used a static IP
address must be assigned to the Call Recorder.
IP addr: 0:0:0:0
NEXT
Set the IP address of the Call Recorder
• Press CHANGE to enter the IP address of the Call Recorder.
IP addr: ▓00:000:000:000
STORE
Enter the IP address of the Call Recorder
Use the numerical keys to enter the IP address of the Call Recorder.
Press STORE to save the IP address of the Call Recorder.
•
• Press NEXT to save and move on to the next menu item.

11.8 IP subnet mask

The IP subnet mask is used by the Call Recorder if access from outside the
network is required. In this case the Gateway will need to be entered as well.
60
Yes
CHANGE STOP
CHANGE STOP
CANCEL
Call Recorder manual © Vidicode 2005